3D PRINTING FILAMENT EXTRUDER PRODUCTION LINE
(single color)
1.Application:
This production line is used to manufacture 3d printing filaments.
Applicable material:ABS,PLA,PETG
Wire thickness: 1.75mm, 3mm
Wire error:±0.03mm
2. Parameters
| No | Project | Parameters | Remark |
| 1 | Machine center height | 1000mm | |
| 2 | Voltage | 380V/3p/50hz | 220v/3p/60hz available |
| 3 | Color | Green/white/yellow | |
| 4 | Production capacity | 15-25kg/spool | Depending on the material |
| 5 | Electric wire | 3phase 5 wires,10mm2 | |
| 6 | Machine size | 15m Lx1m Wx2.5m H | |
| 7 | Total Power | 45KW | |
| 9 | Raw materials for machine testing | PLA,ABS,PETG | Supplied by buyer |
3. Features:
1. The main motor adopts Shihlin Motor;
2. The main gearbox adopts hard toothed surface gearbox;
3. Frequency converter: INOVANCE;
4. Relay: Omron imported from Japan;
5. Temperature control: Xinjie PLC+Huibang temperature control module;
6. Sink design, three-stage gradual cooling design for hot water, warm water, and cold water;
7. 10 inch color human-machine interface control
8. Closed loop automatic control wire diameter system
4.Packing List
| No | Project | Size | Qty |
| 1 | Single-screw extruder | Φ45*28D | 1 set |
| 2 | Extruder mould for 3d printing filaments | 1.75-3mm | 1 set |
| 3 | Stainless steel water sink for hot water and warm water | 3 meters | 1 set |
| 4 | Four-wheel tractor | 4 wheels | 1 set |
| 5 | 8m horizontal tension storage rack | horizontal type | 1 set |
| 6 | length gauge | | 1 set |
| 7 | Single axis caliper for wire thickness | TS | 1 set |
Product Tags:
|
|
High Speed 3D Filament Production Line 3D Printing Consumables Drawing Extruder Images
|
